Thermoformed aligners are often difficult to separate from the model. DMU has created a solution to this problem with the LAC Separator. In less than 10 seconds and with just a few hand movements, it is possible to detach clear aligner foils from the model comfortably and without deformations.
Improve the quality of your products and reduce manual workflows of your aligner production at the same time!
How it works
1. Place the dental model on the vacuum plate under the separating threads and tighten them.
2. Insert the vacuum disk into the thermoforming unit using the adapter ring suitable for your device.
3. Thermoforming: Inserting the aligner foil into the thermoforming unit and thermoforming the aligner.
4. After thermoforming, insert the aligner with the vacuum disk into the separator.
5. Place the vacuum lid on the separator and secure it with a twisting motion.
6. Use the lever on the lid to create a vacuum, which serves as a countermeasure for the separation process.
7. Pull the spirit level towards you and downwards to separate the dental model from the aligner foil.
8. Unlock the vacuum lid and remove it. The separated aligner can now be removed and is ready for further processing.
The advantages speak for themselves
Improve the quality of your products and reduce manual workflows of your aligner production at the same time!